Solved

Static NAT

Posted on 2006-07-04
4
351 Views
Last Modified: 2010-04-09
Hi all,

1. I have to do a one more static nat to 10.1.14.15 .. i have already done one static nat as mentioned below. can i do one more nat for that DMZ iP?

static (DMZ,outside) 210.212.236.217 10.1.14.15 netmask 255.255.255.255

0
Comment
Question by:ssshibu
  • 2
  • 2
4 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 75 total points
ID: 17037135
No. You can only do 1 public to 1 private. You cannot map more than one public IP to the same private IP.
However, you can assign another private IP to the same system and assign a different public IP to it.
You can assign up to 5 IP's to the same NIC on most windows boxes.
0
 

Author Comment

by:ssshibu
ID: 17037219
Thanks a lot

However, you can assign another private IP to the same system and assign a different public IP to it.You can assign up to 5 IP's to the same NIC on most windows boxes. -- how do i assign an another ip to the same system ? where do i go and change?



0
 
LVL 79

Expert Comment

by:lrmoore
ID: 17037237
Select TCP/IP protocol, Advanced button, IP Settings, IP addresses,  Add... button and just add another IP address/mask
0
 

Author Comment

by:ssshibu
ID: 17037296
ohhhhhh ok i did not notice that ...thanks a lot
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
PFsense box as firewall 5 64
iptables and udp ports 23 125
DHCP lease issue ? 8 95
Sonicwall SOHO Firewall port access 5 92
To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
The DROP (Spamhaus Don't Route Or Peer List) is a small list of IP address ranges that have been stolen or hijacked from their rightful owners. The DROP list is not a DNS based list.  It is designed to be downloaded as a file, with primary intention…
In a recent question (https://www.experts-exchange.com/questions/29004105/Run-AutoHotkey-script-directly-from-Notepad.html) here at Experts Exchange, a member asked how to run an AutoHotkey script (.AHK) directly from Notepad++ (aka NPP). This video…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question