Solved

AD Site question....

Posted on 2006-07-04
5
243 Views
Last Modified: 2010-03-18
Dear all:

I have one domain three sites,
siteA : subnet 172.1.1.0
siteB : subnet 172.1.2.0
siteC : subnet 172.1.3.0

siteA can ping siteB and siteC,but siteB can't ping siteC..

now i found envent log say:
event ID:1865
source :NTDS KCC

when i just have two site that's fine,but when the third site created,the error appear:
anyone know how to create three site correctlly?

thanks

0
Comment
Question by:darkeryu
  • 3
  • 2
5 Comments
 
LVL 29

Expert Comment

by:mass2612
ID: 17040635
0
 
LVL 6

Author Comment

by:darkeryu
ID: 17051704
Hi:

the site B can't ping the siteC,
how do i set it up ?

thanks
0
 
LVL 29

Accepted Solution

by:
mass2612 earned 500 total points
ID: 17054424
Since your network is not fully routed some KCC errors are fairly normal. i.e. not all sites have a direct link between all other sites.

If you want to create a site link bridge: -

To create a site link bridge
1.  Open Active Directory Sites and Services.
 
2.  In the console tree, right-click the inter-site transport folder for which you want to create a new site link bridge, and then click New Site Link Bridge.

Where?

• Active Directory Sites and Services/Sites/Inter-Site Transports/intersite transport for which you want to create a new site link bridge
 
 
3.  In Name, type a name for the site link bridge.
 
4.  Click two or more site links to be bridged, and then click Add.
 
http://technet2.microsoft.com/WindowsServer/en/Library/99229add-3c6d-4a85-b3c7-a4743b8fb2f81033.mspx?mfr=true
0
 
LVL 29

Expert Comment

by:mass2612
ID: 17054540
Here some more info from the MS 70-294 training kit: -

"A site link bridge connects two or more site links in a transport where transitivity has been disabled in order to create a transitive and logical link between two sites that do not have an explicit site link. For example, in Figure 5-1, site link Ber-Lu connects the Bern and Lucerne sites. Site link Lu-Zur connects the Lucerne and Zurich sites. Site link bridge Ber-Lu-Zur connects site links Ber-Lu and Lu-Zur."

                 Bern site -------------------------------- Zurich site
                       |        Ber-Lu-Zur Site link Bridge       |
Ber-Lu site link  |                                                     | Zur-Lu site link
                       |                                                     |
                         |                                                 |
                             |---- Lucerne site ------------- |

"Because site links are transitive by default, it is seldom necessary to create site link bridges. In other words, if site link transitivity is enabled, then manually creating a site link bridge is redundant and has no effect. However, if site link transitivity is disabled, you need to manually create a site link bridge if a transitive link is required to handle your organization’s replication strategy."
0
 
LVL 6

Author Comment

by:darkeryu
ID: 17060079
thanks

I will try it.
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Wifi(LAN) GW being picked up 2 45
VLAN Tag for chained network device. 11 65
Windows 7 home sp1 updates 9 92
Office 2016 Network Activation 2 16
This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
The Need In an Active Directory enviroment, the PDC emulator provide time synchronization for the domain. This is important since Active Directory uses Kerberos for authentication.  By default, if the time difference between systems is off by more …
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

896 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now