Solved

Inexpensive T3/FE Router

Posted on 2006-07-05
2
175 Views
Last Modified: 2010-04-17
I need a large qty of routers that have a low profile (3in or less by 19/23 in rack mountable) AC/DC convertible that have 1 each T3/E3 interface and 1 each Fast Ethernet port.

$1500 or less preferred........any suggestions?
0
Comment
Question by:gigamo
2 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 17043888
Are you kidding? T3 module by itself can sometimes run $11,000
Adtran Netvanta 5305 is about the cheapest on the market. It is 3U high (5 inches), $6000 without the T3 module, another $1500
http://www.adtran.com/adtranpx/Doc/0/OBP391V3S9LKJ227B15QQMAE95/64200990L1-8F_11_1.pdf

You can get a T1 router for under $1000  . .. .

0
 

Author Comment

by:gigamo
ID: 17044072
While I appreciate the feedback, I am in the secondary market arena and I can buy many different solutions that are well under $5K dollars including one from Haiwei that is brand new.

T3 modules can be bought for many different platforms for way under $11K.

Anyone else want to give it try?
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question