?
Solved

CISCO SDM Fails before Password (Raw Script)

Posted on 2006-07-06
8
Medium Priority
?
750 Views
Last Modified: 2011-09-20


I am attempting to assist someone remotely, in getting a CISCO 1721 configured.

The user can get SDM to start but instead of getting the SBM Launch screen up in the POP window, He gets a screen full of RAW Java and HTML code.  

I know I have seen this before, and I seem to recall a simple fix, but I just can't remember the option or change that needs to be set to avoid this issue.  

Your assistance,  or a CTL + ALT + DEL for my brain this evening world be appreatiated.

JMS..
0
Comment
Question by:jsilberberg
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
8 Comments
 
LVL 22

Expert Comment

by:Rick Hobbs
ID: 17054471
Have seen this when older version of Java installed.  Check for update
0
 
LVL 9

Expert Comment

by:jasonr0025
ID: 17054956
Newer versions of java do not work with older cisco OS versions.  If you can try using an older version of java or a newer version on the cisco IOS for your router/
0
 
LVL 10

Expert Comment

by:naveedb
ID: 17055128
Install Firefox and try to access it through firewox browser instead of IE
0
NEW Veeam Agent for Microsoft Windows

Backup and recover physical and cloud-based servers and workstations, as well as endpoint devices that belong to remote users. Avoid downtime and data loss quickly and easily for Windows-based physical or public cloud-based workloads!

 
LVL 12

Expert Comment

by:r_naren22atyahoo
ID: 17055361
Several Cisco Java based products have problems using the latest Java 1.5,
try uninstalling Java and installing a slightly older version (must be
1.4.2_05 or higher though)

i mean install the 1.4 java version

regards
naren
0
 

Author Comment

by:jsilberberg
ID: 17058448

Good Morning..

  The issue was not JAVA but rather Security Profile Setting.  They were Blocking Active Components..

  JMS..
0
 

Accepted Solution

by:
CetusMOD earned 0 total points
ID: 17350896
PAQed with points refunded (50)

CetusMOD
Community Support Moderator
0
 

Expert Comment

by:SigmaTechology
ID: 23767483
The problem comes out as soon as i update my java to the 6 and update 12 what i did i just uninstall that and everything work again

0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question