2003 NLB question

I have NLB 2003 working between my 2 Citrix servers fine for WI network load .

Problem: We have a T1 point to point WAN to another subnet 192.168.x.x
I can do a nslookup for the name of the VIP (NLB address) from the 192.168.x.x network  
I can ping the IP address but when trying to access from url I get THE PAGE CANNOT BE DISPLAYED error


My network ip is 172.27.24.x /252

 VIP address 172.27.24.44
Server1 ip 172.27.24.45
Server 2 ip 172.27.24.46
cogitAsked:
Who is Participating?
 
PberSolutions ArchitectCommented:
I should have read your post a little better.

You must have all nodes of an NLB network in the same broadcast domain.  In other words, the second computer on the other subnet will not work.
0
 
PberSolutions ArchitectCommented:
Can you connect from the URL if you put the ip address instead of the host name?  If so it might be strictnamechecking on the server.

http://www.jsifaq.com/SUBQ/tip8000/rh8062.htm.

0
 
cogitAuthor Commented:
NO.
0
 
cogitAuthor Commented:
Thanks
0
 
PberSolutions ArchitectCommented:
If your hardware supports this, what you can do is create the same VLAN on both switches.  Then the subnets would be the same and NLB shoulod work.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.