Solved

Avaya IPO over PTP T-1s Switch / Router Configurations

Posted on 2006-07-07
3
756 Views
Last Modified: 2012-06-21
Good Afternoon,

We just got two T-1 lines installed and I want to run the Avaya IP office phone system over the WAN to connect the different plants together.
right now I only have the Avaya IPO in our Arizona facility but I plan on bringing the MA facility online within the next couple months. How do I configure QoS on my switches and Routers?
here is my layout

AZ
Avaya IPO is connected to a cisco 2960 24 port gigabit switch
2960 switch is connected to a sonicwall for internet access/VPN access to main facility and to a cisco 1841 router with a T-1 connection to MA
MA
I have a cisco 2821 router with two T-1 lines 1 going to the 1841 in AZ and 1 going to my MS facility connecting to another 1841.
The 2821 router is connected to (2)  2948G 48 port switches.
The 2948G switch connects to a sonicwall that connects to the internet hosts IPSEC VPN tunnels from AZ, MS, and mobile users
We are going to upgrade to voicemail pro and put the VMP server in MA. I will be having around 15voicemail connections at one time from MA, MS, and AZ.



any more info needed?
0
Comment
Question by:jbla9028
3 Comments
 
LVL 1

Accepted Solution

by:
KCDean earned 500 total points
ID: 17063465
I think the key question is do you have the hardware in every area possible.
Quote
"Anyone who has ever lived near or traveled through a big city has experienced the frustration of a traffic jam. Sports car or SUV, beat-up wreck or Bentley, all cars crawl along at the same pace when the number of cars exceeds the capacity of the road. The common question all drivers ask as they tap their steering wheels impatiently is, "Why didn't they do a better job of planning this road?"
The practical reality is that roadways are built based on traffic flow assumptions and funding constraints. Networks operate with the same constraints, which is why congestion inevitably occurs."
So I guess is all hardware in place to make this work, with good results.
Quote
"QoS is not a solution that is implemented in a single product. In order to work effectively, all of the equipment that has a role in forwarding traffic through the network (for example, routers and switches) should support QoS. Even more importantly, these different network components must have the same understanding of how traffic is to be classified and prioritized, otherwise there will be a breakdown in communication—and inevitable congestion—somewhere in the system.\"

From what I can see you hardware looks good but I just wanted to make sure.
As I will be doing VOIP in the near future, and will be researching this very soon.

0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
IPv6 and IPv4 Subnetting scheme 4 77
Boot Camp 3 57
ASA NAT rule change 3 22
Websites pages will not open in any browser 7 25
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question