Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

remote access  in SUSE 10

Posted on 2006-07-08
7
Medium Priority
?
270 Views
Last Modified: 2010-03-18
HI,
I am fairly new to the Linux world and I have a little experierence with SUSE 10.

I would like to setup a remote access from a windows xp pc  to a SUSE 10 pc.

I have install putty into my windows xp.

I typed my SUSE pc IP 192.168.1.4 into Putty  but "Network error: Connection timed out" popped up.

please  advise me how to implement my goal-------remote access
0
Comment
Question by:llvllar1on
  • 4
  • 3
7 Comments
 

Author Comment

by:llvllar1on
ID: 17067142
in case of confusion. i would like to remote access into suse.
0
 
LVL 19

Expert Comment

by:alextoft
ID: 17067269
A couple of things to check:

- Is SSHD running on the SuSE box? It should be by default, but always worth checking this first...
     Use /etc/init.d/sshd status
     to find out

- SuSE installs a firewall by default, check that SSH (port 22) is allowed through the firewall
0
 

Author Comment

by:llvllar1on
ID: 17067298
when I checked , the status of sshd is RUNNING. and I dont know how to check if the firewall is allowed or not.
0
Veeam Disaster Recovery in Microsoft Azure

Veeam PN for Microsoft Azure is a FREE solution designed to simplify and automate the setup of a DR site in Microsoft Azure using lightweight software-defined networking. It reduces the complexity of VPN deployments and is designed for businesses of ALL sizes.

 
LVL 19

Accepted Solution

by:
alextoft earned 600 total points
ID: 17069009
Open up yast, then in the security section is the firewall. Check if SSH is listed in allowed services.
0
 

Author Comment

by:llvllar1on
ID: 17069443
Thank u. now i can access from Lan, but how can i do in order to access from WAN?
0
 
LVL 19

Expert Comment

by:alextoft
ID: 17070804
Set up a port forwarding rule on your router to forward port 22 to whatever your internal IP is. eg 192.168.x.x

0
 

Author Comment

by:llvllar1on
ID: 17070877
Thank you , it is work.    every time when someone try to connect my rounter port 22 , my rounter will forward to my pc port 22. Am I right?
Tell me how to add point to u?
0

Featured Post

Veeam and MySQL: How to Perform Backup & Recovery

MySQL and the MariaDB variant are among the most used databases in Linux environments, and many critical applications support their data on them. Watch this recorded webinar to find out how Veeam Backup & Replication allows you to get consistent backups of MySQL databases.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
Video by: ITPro.TV
In this episode Don builds upon the troubleshooting techniques by demonstrating how to properly monitor a vSphere deployment to detect problems before they occur. He begins the show using tools found within the vSphere suite as ends the show demonst…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…

927 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question