Solved

Laptop consistently dropping excellent signal from Linksys wireless-G router

Posted on 2006-07-15
2
196 Views
Last Modified: 2010-03-19
I have a relatively new Dell Laptop and have recently set up a new wireless system in my house with a Linksys wireless-G  2.4GHz router.  I can access an excellent signal throughout the house but will drop the signal periodically for no apparent reason.

I also have new Uniden DCT648-3 2.4 GHz  phones and I am guessing the problem may be from interference from the phones. Is this true?  What are other possible causes? Is there anything I can do to deal with this problem without purchasing new equipment?

many thanks
0
Comment
Question by:mamadouthiam
2 Comments
 
LVL 7

Accepted Solution

by:
imacgouf earned 175 total points
ID: 17114393
It can be due to serveral causes

Take a look at this articles
Top 6 Reasons Why WiFi Network Connections Drop
http://compnetworking.about.com/od/wifihomenetworking/tp/connectiondrop.htm
0
 
LVL 7

Assisted Solution

by:nttranbao
nttranbao earned 75 total points
ID: 17114849
Yup, you are right. 2 devices working at the same frequency 2.4Ghz will interfere with each other. Try to change the channel from 1 to 11. Or put the 2 devices away from each one.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

786 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question