Solved

XP Pro VPN Server

Posted on 2006-07-17
2
306 Views
Last Modified: 2010-04-12
Just a quick one, I am missing something simple here.

I have an XP Pro machine setup as a VPN server. All works fine no p[roblems. The only problem is it will only accept 1 connection ata atime.

I need to allow 3-4.

Any Help Please....
0
Comment
Question by:alanheaton
  • 2
2 Comments
 
LVL 77

Accepted Solution

by:
Rob Williams earned 500 total points
ID: 17126505
You are not missing anything. Windows XP only supports a single connection. To allow multiple connections you need to install Server 2003. The other, and likely less expensive option would be to install a VPN router. Clients would then connect to the VPN router, rather than the VPN server behind it. There are many units available but one of the most flexible and affordable is the Linksys RV042. This will allow you to create a site to site connection with 2 routers, connect with the Windows client , or use the Linksys Quick VPN client. Lots of options and very dependable.
0
 
LVL 77

Expert Comment

by:Rob Williams
ID: 17172791
Thanks alanheaton,
--Rob
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
I've written this article to illustrate how we can implement a Dynamic Multipoint VPN (DMVPN) with both hub and spokes having a dynamically assigned non-broadcast multiple-access (NBMA) network IP (public IP). Here is the basic setup of DMVPN Pha…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

786 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question