Solved

Cisco Wireless LAN Controller

Posted on 2006-07-20
5
917 Views
Last Modified: 2013-11-16
I a trying to setup a Cisco 4402 Cisco Wireless LAN Controller. The cisco documentation is awful on this project and does not really describe what interface does what.

I need a description of each possible interface, what it does, and where it should be plugged in (per say) to the network.

After that I need a brief overview of the tasks needed to be completed to get some LWAP AP's up and running and accepting client connections using the WLC to configure them.
0
Comment
Question by:JBrianClark
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
5 Comments
 
LVL 22

Expert Comment

by:Rick Hobbs
ID: 17151393
On the front should be the console port connections, one 9pin din, 1 RJ45.  On the back should be 2 10/100/1000 RJ45 connections to your network.   They are redundant.
0
 
LVL 22

Accepted Solution

by:
Rick Hobbs earned 500 total points
ID: 17151403
0
 
LVL 22

Expert Comment

by:Rick Hobbs
ID: 17156265
Did the step-by-step configuration documents I provided links to get you going in the right direction?
0

Featured Post

Free NetCrunch network monitor licenses!

Only on Experts-Exchange: Sign-up for a free-trial and we'll send you your permanent license!

Here is what you get: 30 Nodes | Unlimited Sensors | No Time Restrictions | Absolutely FREE!

Act now. This offer ends July 14, 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question