Solved

CISCO IOS (7206 router)

Posted on 2006-07-24
2
598 Views
Last Modified: 2013-11-29
quick question:

I have a 7206 cisco router  when the router boots, it won't load the saved start-up config.  I've tried different flash cards with different IOS, but it doesn't seem to matter.  It just goes to the initial configuration prompt like its a new router.

Any suggestions...
0
Comment
Question by:ritru
2 Comments
 
LVL 32

Accepted Solution

by:
rsivanandan earned 125 total points
ID: 17170420
What is your config-register set to ?

It should be displayed with you do 'show ver'.

Set it to 0x2102

Cheers,
Rajesh
0
 

Author Comment

by:ritru
ID: 17170940
thanks
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question