Solved

Cisco 3560 DHCP question

Posted on 2006-10-19
3
1,158 Views
Last Modified: 2012-06-21
Quick question regarding the features of a Cisco 3560 switch.  I have a 24-port Cisco 3560 switch that I would like to divide up into 6 different VLANs.  Each VLAN will be on its own subnet, independent of one another.  The VLANs do not need to communicate with each other.

My question is, can the DHCP function of the 3560 provide IPs dynamically to all 6 different subnets?  Or can it only provide IPs for only one subnet, and I will need to install some type of DHCP server on the 5 other subnets?  

Thanks in advance!
0
Comment
Question by:jimcmu
3 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 125 total points
ID: 17769391
You're in luck! the 3560 can have almost as many dhcp scopes as you want them to...

vlan 10
vlan 11
vlan 12
vlan 13
vlan 14
vlan 15

interface vlan 10
 ip address 192.168.110.1 255.255.255.0

ip dhcp pool VLAN10
 network 192.168.110.0/24
 ip dhcpd excluded-address 192.168.110.1
 default-router 192.168.110.1
 dns-server 192.168.100.100 192.168.100.200

interface vlan 11
 ip address 192.168.111.1 255.255.255.0

ip dhcp pool VLAN11
 network 192.168.111.0/24
 ip dhcpd excluded-address 192.168.111.1
 default-router 192.168.111.1
 dns-server 192.168.100.100 192.168.100.200

interface vlan 12
 ip address 192.168.112.1 255.255.255.0

ip dhcp pool VLAN12
 network 192.168.112.0/24
 ip dhcpd excluded-address 192.168.112.1
 default-router 192.168.112.1
 dns-server 192.168.100.100 192.168.100.200

<etc>


0

Featured Post

How to improve team productivity

Quip adds documents, spreadsheets, and tasklists to your Slack experience
- Elevate ideas to Quip docs
- Share Quip docs in Slack
- Get notified of changes to your docs
- Available on iOS/Android/Desktop/Web
- Online/Offline

Join & Write a Comment

Suggested Solutions

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

746 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now