Solved

Cisco multiple DHCP pools ??

Posted on 2006-10-20
5
2,246 Views
Last Modified: 2010-08-05
Hi gurus


I'm wondering is't possible to configure multiple DHCP pools to ciscos IOS     12.2(25)SG software.

I'm having multiple VLANS and would like to give every VLAN own DHCP pool, i.e.

VLAN 10  --> 10.1.10.0   /24
VLAN 20 -->  10.1.20.0   /24

....



Thanks for any help

_jussi
0
Comment
Question by:salmjuh
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
5 Comments
 
LVL 79

Expert Comment

by:lrmoore
ID: 17773901
0
 

Author Comment

by:salmjuh
ID: 17848248
No, this is not my case

First of all, I'm using 4503 with SUP II (IOS :12.2(31)SGA) and the command syntax is little bit different.

How ever, everything  should be OK:


----------------------------------
show running:
ip dhcp pool VLAN40
   network 10.71.40.0 255.255.255.0
   default-router 10.71.40.1
   dns-server 196.33.222.100
   domain-name foo.com
   netbios-name-server 196.33.222.100
   netbios-node-type h-node
   lease 14


Switch_2#sh ip dhcp server statistics
Memory usage         5911
Address pools        1
Database agents      0
Automatic bindings   0
Manual bindings      0
Expired bindings     0
Malformed messages   0

Message              Received
BOOTREQUEST          0
DHCPDISCOVER         2
DHCPREQUEST          13
DHCPDECLINE          0
DHCPRELEASE          0
DHCPINFORM           30

Message              Sent
BOOTREPLY            0
DHCPOFFER            0
DHCPACK              0
DHCPNAK              11
Switch_2#


Switch_2#sh dhcp server
   DHCP server: ANY (255.255.255.255)
    Leases:   0
    Offers:   0      Requests: 0     Acks: 0     Naks: 0
    Declines: 0      Releases: 0     Bad:  0


This look for me that it doesn't get any DHCP request at all ??

Buy the way, the VLAN switch is another switch, so is that the problem, ie. I need to configure to same switch bouth, VLAN and DHCP pool ???


Thanks  for any help
-Jussi

0
 

Author Comment

by:salmjuh
ID: 17848549
Found it !! becuase the switch is different network subnet, I needed to expand DHCP to another VLAN by giving a command

conf t
 int vlan 40
  ip helper-address "SWITCHS IP ADDRESS"

thast it.

I remembered, that DHCH broadcast messages dount go thru subnets.


Thanks all
-Jussi
0
 
LVL 1

Accepted Solution

by:
Computer101 earned 0 total points
ID: 19526845
PAQed with points refunded (50)

Computer101
EE Admin
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

696 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question