Solved

Windows 2003 Server ... RRAS' NAT ... and Public IPs

Posted on 2006-10-21
3
202 Views
Last Modified: 2010-03-19
I'm trying to assign a PUBLIC IP to a computer behind the NAT so I can access it from off site via Internet.
0
Comment
Question by:Defter
  • 2
3 Comments
 
LVL 77

Expert Comment

by:Rob Williams
ID: 17782228
One option, which is common with RRAS, is to assign the IP to your router/firewall and then configuring port forwarding to the RRAS server. When you connect to the routers public IP, the appropriate traffic is automatically forwarded to the server.
0
 

Author Comment

by:Defter
ID: 17782251
I'm setup like this:


T1 ---> Server (Win2k3) ---> Switch ---> Slaves (Client computers that I'm trying to configure Public IP's on )

I dont understand what you mean rob... sorry

0
 
LVL 77

Accepted Solution

by:
Rob Williams earned 500 total points
ID: 17782286
Sorry Defter, thought you wanted access to the RRAS server, not the PC's behind it. You can configure 1 to 1 NAT within RRAS;
http://www.windowsnetworking.com/articles_tutorials/NAT_Windows_2003_Setup_Configuration.html
but I don't know that you can configure it to assign these Public IP's to the PC's. Normally they would be connected directly to the Internet. Sorry, personally I don't know how to do that. Perhaps someone else will be able to assist.
What is it that you wish to accomplish, i.e. why do the PC's need a public IP?
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question