Solved

WAP54G v2 web server IP

Posted on 2006-10-22
3
429 Views
Last Modified: 2008-03-06
I was at an estate sale last week, and bought a box of computer stuff...In it was a WAP54G v2...

I plugged it in, I get a signal but it is encrypted...there was no install CD in the box...

I understand the WAP has a Web Server, and I am trying to figgure the IP address so I can access it and set it
up for my network...

I have tried  192.168.0.1,  0.245, 0.254
and 192.168.1.1,   1.245,  1.254

Research indicated one of those IP's should work...unless the user reset to some completly different IP range,
I would think I could get in thru the web server...

Thoughts, Ideas???

STeve

0
Comment
Question by:stevem5000
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 2

Author Comment

by:stevem5000
ID: 17784255
Additional...

I was able to reset the WAP...the SSID changed from what it was to "Linksys"...that would put it on the
default IP range of 192.168.1.x....

However, I run my network on 192.168.25.x, so the WAP is not in my subnet....

My network is a static IP into  2Wire router...I run that static straight thru into a Linksys RV042 and my LAN off of that...
I thought I would just change the subnet on my RV042, and that should pick up the WAP IP, but I cannot class B the RV042...

So, Kinda stuck...
0
 
LVL 3

Accepted Solution

by:
bcohea earned 500 total points
ID: 17784425
Remove the WAP54G from your network and connect a lone workstation to it via an ethernet cable with the interface set to a static IP address of 192.168.1.195 (the last octet really doesn't matter, just don't put 1 or 245). Then open up IE or Firefox or any browser and go to 192.168.1.245 and that should bring you to the GUI. Change the IP address of the WAP to 192.168.25.x and correct subnet mask and point the default gateway to the interior IP address of the nearest router.

bcohea
0
 
LVL 2

Author Comment

by:stevem5000
ID: 17784607
That did it!!!!

Many, many thanx...

STeve
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Rasberry PI is a low cost piece of hardware that you can have a lot of fun with through experimenting and building/working on projects like media players, running a low cost computer, build data loggers etc. - see: https://www.raspberrypi.org
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
Are you ready to implement Active Directory best practices without reading 300+ pages? You're in luck. In this webinar hosted by Skyport Systems, you gain insight into Microsoft's latest comprehensive guide, with tips on the best and easiest way…

742 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question