Solved

Cisco VPN client to PIX 501 firewall Configuration

Posted on 2006-10-23
5
334 Views
Last Modified: 2010-04-12
Need to set up a simple Cisco IPSEC VPN client to PIX 501 firewall.  Not all that familier with Cisco's CLI.  Can anyone assist me with setting configuring the the VPN on the PIX using  Cisco PDM?

Thanks
0
Comment
Question by:twilliams0860
  • 2
5 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 17795561
Which version of PDM? The newest one has a slick wizard to create the VPN.
Else, here's a good command-line guide
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml
0
 

Author Comment

by:twilliams0860
ID: 17799509
not sure what the PDM version is as of yet.  I am assisting a friend and in the process of gathering that information.

Thanks
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 17799564
pix#sho ver

Cisco PIX Firewall Version 6.3(5)
Cisco PIX Device Manager Version 3.0(4)

0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Join & Write a Comment

Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

758 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now