Solved

dial-in users

Posted on 2006-10-24
5
260 Views
Last Modified: 2010-04-17
dear experts,

we need to expand our network to a remote user who lives in districts. we are looking at solution that allow remote user (about 9 users) to dial-in to our HQ office via dia-up (landline phone), and thus can access our resources such as cooporate mails, intranet, etc...

i was told that cisco box can be used to employ and answers to such solution; but not quite sure what are the specs and additional equipment need to be purchased along the box.

i would be very much appreciated if you could let us know what are the exact equipments that we need to purchase.

thanks very much in advance.

rgds,
sot
0
Comment
Question by:sthay
  • 3
  • 2
5 Comments
 

Expert Comment

by:ssshibu
ID: 17816944
Hi,

I would go with CISCO AS5300 series universal Gateway . if u r remote dial in user base is frequently increasing i would recommend to use this product. You can terminate ISDN PRI on to that and configure remote dial in access.

0
 

Author Comment

by:sthay
ID: 17817589
Thanks very much for your answer. Other than the CISCO box do I have to buy any other pieces of equipment such as modem and maybe more...

Hoping to hear back.

Sot
0
 

Expert Comment

by:ssshibu
ID: 17817617
Hi,

While making order you can include those thing along with u r application.. like

AS5350 - 01 nos

E1 port - 2nos (for terminating ISDN PRI)

Modem card- 2nos- 60 port(each modem card will have 30 port)

IOS- Cisco AS5300 series IOS IP plus

Power supply - redundant



0
 

Author Comment

by:sthay
ID: 17827669
hello ssshibu,

thanks for the details you sent. the details really helped me preparing the order details. however there are some tecnical terms you used here such as NOS, is that of Network Operating System?

also, our phone company here does not have ISDN, we are sort of having old technology, the typical analog phone signal.

one last thing, why do we need 2nos x 70 ports if i have no more than 9 users that can simutaneously dial-in?

thanks once again for your clarification.

regards,
sot
0
 

Accepted Solution

by:
ssshibu earned 125 total points
ID: 17831919


hello ssshibu,

thanks for the details you sent. the details really helped me preparing the order details. however there are some tecnical terms you used here such as NOS, is that of Network Operating System?

"NOS "  i meant was numbers  ie 2nos - 2 numbers


also, our phone company here does not have ISDN, we are sort of having old technology, the typical analog phone signal.

one last thing, why do we need 2nos x 70 ports if i have no more than 9 users that can simutaneously dial-in?

Here i just gave an example by mentioning Modem card 2nos -60 port..u can specify requirements


thanks once again for your clarification.

regards,
sot
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

It happens many times that access list (ACL) have to be applied to outgoing router interface in order to limit some traffic.This article is about how to test ACL from the router which is not very intuitive for everyone. Below scenario shows simple s…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question