Solved

modem dialup enquiry

Posted on 2006-10-25
3
228 Views
Last Modified: 2013-11-30
Dear Sir,

I have 2 x PC in two different sites, both of them are using 56k dialup modem connection.   If I want to connect both sites via PSTN,  shall I setup one PC as Dialin server ?  or both PCs can just be client and dialup each other ?

I am a bit confused on how two sites can connect with each other via PSTN network ?

thx

Eric
0
Comment
Question by:bigeric
3 Comments
 
LVL 15

Accepted Solution

by:
riteheer earned 50 total points
ID: 17802354
You are correct, you must set up one pc as a dialup server, the other is the client who must dial the number of the line for the 'server' system.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
fabric 1 31
Bandwidth issues? 5 42
Tagged Vlan traffic does not seem to reach DHCP server (and/or possibly back again) 2 65
OSPF - Convergence & Downtime 9 29
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question