Solved

Site to Site VPN, Cisco 501 and third-party router

Posted on 2006-10-25
2
212 Views
Last Modified: 2010-04-12
Hello:

I need to create a site to site vpn between two offices. One already has a 501 in place; the second office is not yet open. There are 35 users at the main office, and they will never need to access to new one. The new office has 4 users; they will access a database in the main office through this vpn. I would just as soon place another 501 in the new office; the boss would like a cheaper solution, given the office size.

Can someone recommend to me a Dlink/Linksys/Whatever router that can establish a site to site vpn with a 501? Looking for a hopefully proven solution, ie This model will Work....


Thanks!
0
Comment
Question by:dcampbez
2 Comments
 
LVL 1

Accepted Solution

by:
w4jcb earned 500 total points
ID: 17808032
0
 

Author Comment

by:dcampbez
ID: 17812593
EXACTLY what I needed, thank you!
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

One of the Top 10  common Cisco VPN problems are not-matching shared keys. This is an easy one to fix, but not always easy to notice, see the case below. A simple IPsec tunnel between fast Ethernet interfaces of routers SW1 (f1/1) and R1(f0/0). …
Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question