?
Solved

Unable to contact the gateway of the network

Posted on 2006-10-27
2
Medium Priority
?
211 Views
Last Modified: 2010-03-18
Mylan is 192.168.254.x 255.255.255.0
i assigned .1 to gateway (Zywall 5)
i assigned .2 to sbs2003 server(primergy 150s4 siemens)
if i try to connect to gateway or to internet using my notebook (.3 IP) everything is ok and also if i try to contact the server
if i try to connect to gateway using the server it does not answer.
If i change the subnet (192.168.12.x) everything works..... what can i do?
i have to use 192.168.254.x in 'cause i have several ipsec vpns with many customers....

help me please!
0
Comment
Question by:thesax73
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 74

Accepted Solution

by:
Jeffrey Kane - TechSoEasy earned 750 total points
ID: 17924495
This probably got ignored because it wasn't placed in the SBS Small Business Server Topic Area.  Please advise if you still need assistance.

Jeff
TechSoEasy
0
 

Author Comment

by:thesax73
ID: 18233512
I found thanks... it really was firewall upgrading firmware the problem is closed!!!

thanks
0

Featured Post

Optimize your web performance

What's in the eBook?
- Full list of reasons for poor performance
- Ultimate measures to speed things up
- Primary web monitoring types
- KPIs you should be monitoring in order to increase your ROI

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

FIPS stands for the Federal Information Processing Standardisation and FIPS 140-2 is a collection of standards that are generically associated with hardware and software cryptography. In most cases, people can refer to this as the method of encrypti…
Trying to figure out group policy inheritance and which settings apply where can be a chore.  Here's a very simple summary I've written which might help.  Keep in mind, this is just a high-level conceptual overview where I try to avoid getting bogge…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

765 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question