Solved

PIX VPN changing local pool range

Posted on 2006-11-04
1
173 Views
Last Modified: 2013-11-16
I am frustrated- I changed the VPN local pool to a new range and everytime I connect I still get the IP from the old local pool! The old local pool had 10.1.9.150 - .190 handed out and I was connecting using the .150 IP which even after clearing ISKAMP and removing the local POOL replaced with a new local pool with new range 10.2.1.1 10.2.1.100.

How do I get connected using this new pool address and stop seeing the 10.1.9.150 as always being assigned to my connection? What needs to be cleared so this address is no longer handed out? I've even created a new VPNGROUP and tried with new IP pool and still the 10.1.9.150. Thanks.
0
Comment
Question by:murphymail
1 Comment
 
LVL 32

Accepted Solution

by:
rsivanandan earned 500 total points
ID: 17873832
Reboot the PIX once and see if that helps.

If not, post your configuration (sanitized).

Cheers,
Rajesh
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question