Solved

Cisco PiX/RADIUS VPN Authentication

Posted on 2006-11-08
4
403 Views
Last Modified: 2010-04-17
Hello All,

I have a Cisco PiX with a VPN previously configured to authenticate against RADIUS/Active Directory. I have installed a new Active Directory server and would like to set up the PiX to simply do a group authentication. I have posted another question at http://www.experts-exchange.com/Networking/Q_22043197.html with the Pix configuration. How can I turn off RADIUS and just use basic group authentication?

Thanks!
0
Comment
Question by:cubaman
  • 2
4 Comments
 
LVL 32

Accepted Solution

by:
rsivanandan earned 250 total points
Comment Utility
http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

The above should do, basically it is about removing all the aaa parameters and removing authentication from vpngroup.

Cheers,
Rajesh
0
 
LVL 32

Expert Comment

by:rsivanandan
Comment Utility
any updates ?

Cheers,
Rajesh
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

Problem Description:   Couple of months ago we upgraded the ADSL line at our branch office from Home to Business line. The purpose of transforming the service to have static public IP’s. We were in need for public IP’s to publish our web resour…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

728 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now