Visit booth #2167 to see the new ATEN VM3200 32 x 32 Modular Matrix Switch. Other highlights include the VE8950 4K HDMI Over IP Extender, VS1912 12-Port DP Video Wall Media Player and VK2100 ATEN Control System. Register now with Free Pass Code ATEN288!
Course Of The Month
4 days, 16 hours left to enrollBecome a Premium Member and unlock a new, free course in leading technologies each month.
Solved
Cannot detect 2nd network card in FC5
Posted on 2006-11-08
I would like to create a proxy server using FC5. My board has an on-board network card and i installed a PCI NIC card. However, when i boot up both in text and X-Win modes, the 2nd network card cannot be detected.
The 2nd nic card is working when installed in other computers. Also when i plugged in the lan cable, the activity light is on. I also restarted the kudzu service but nothing happened. When i perform an 'ifconfig' only eth0 and lo appears although the 2nd nic card is already installed. In FC3 and FC4, they have detected my 2nd nic card during bootup.
Did i miss something here?
The 2nd nic card is working when installed in other computers. Also when i plugged in the lan cable, the activity light is on. I also restarted the kudzu service but nothing happened. When i perform an 'ifconfig' only eth0 and lo appears although the 2nd nic card is already installed. In FC3 and FC4, they have detected my 2nd nic card during bootup.
Did i miss something here?
[X]
Welcome to Experts Exchange
Add your voice to the tech community where 5M+ people just like you are talking about what matters.
- Help others & share knowledge
- Earn cash & points
- Learn & ask questions
6 Comments
I have tried stopping and starting kudzu but to no avail...i also tried the link give n by ibu1 but its too complicated for me.
What i did is i installed the 2nd nic card, formatted by hard drive and installed FC5 again, this time during the first phase of the installation, FC5 detected immediately my 2nd nic card.
Thanks for all of your assistance..
What i did is i installed the 2nd nic card, formatted by hard drive and installed FC5 again, this time during the first phase of the installation, FC5 detected immediately my 2nd nic card.
Thanks for all of your assistance..
Featured Post
Question has a verified solution.
If you are experiencing a similar issue, please ask a related question
I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.
IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable.
1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
If you’ve ever visited a web page and noticed a cool font that you really liked the look of, but couldn’t figure out which font it was so that you could use it for your own work, then this video is for you!
In this Micro Tutorial, you'll learn yo…
- Microsoft Applications
- Windows 10
- Windows OS
- Fonts Typography
- Windows 7, Microsoft Word
Suggested Courses
Course of the Month4 days, 16 hours left to enroll
688 members asked questions and received personalized solutions in the past 7 days.
Join the community of 500,000 technology professionals and ask your questions.