Solved

Default user and password for ASUS WL-530g

Posted on 2006-11-09
2
1,524 Views
Last Modified: 2008-02-01
I lost the manual for my ASUS WL-530g.  Anybody knows the factory default user-id and password?
0
Comment
Question by:royrubio
2 Comments
 
LVL 9

Accepted Solution

by:
smidgie82 earned 500 total points
ID: 17909015

Not sure about the 530g, but for the 500g it's admin / admin (for http access), according to http://www.phenoelit.de/dpl/dpl.html .  I've used that list for several devices and software packages, and it's been right so far, so it's worth a try.
0
 

Author Comment

by:royrubio
ID: 17909851
Yes, it works on 530g too.
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now