Solved

Slow Lan with Linksys WAG54GS

Posted on 2006-11-09
4
441 Views
Last Modified: 2007-12-19
I have my laptop conected with my desktop through this router.When I transfer a file I get almost 100mb per minute.Is that normal for a lan?(I am talking about a wired lan-not wireless).
0
Comment
Question by:skiabox
  • 3
4 Comments
 
LVL 7

Expert Comment

by:dlangr
ID: 17909885
depends on the speed of your network. If it is a Gigabit network 100mb is normal. see http://www.marco.org/127
0
 

Author Comment

by:skiabox
ID: 17913219
I am talking for a wired connection here.Not wireless.Thnx anyway for the answer.
0
 
LVL 7

Expert Comment

by:dlangr
ID: 17926423
Please look at the link i provided again and look for the section that starts with "How about wired networks?" Also note that i talked about normal speed for a Gigabit network, wich is usually wired anyways.
0
 
LVL 7

Accepted Solution

by:
dlangr earned 125 total points
ID: 17926561
I looked up your router on linksys.com and it provides an 10 or 100 Mbit connection for wired lan.  According to the page i linked even a 100 Mbit lan connection would only get you around 65.6 Mbit/s troughput. So almost 100 Mbit/s is very good. See http://en.wikipedia.org/wiki/List_of_device_bandwidths under "Local area network" for a more complete list of transfer speeds.

Also see http://www.pixelbeat.org/speeds.html. Be sure to select the right units in the first table.

0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
I had an issue with InstallShield not being able to use Computer Browser service on Windows Server 2012. Here is the solution I found.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

831 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question