Solved

SonicWALL TZ170 one to one NAT?

Posted on 2006-11-09
3
348 Views
Last Modified: 2009-11-27
I have two web servers behind my SonicWALL TZ170 and up to this point have only been using one of them internally.  I now need to have both servers accessible from the outside world.  Problem is both listen on port 80 so I need to have 2external IP addresses one routing to server 1 and the other to server 2.  Should I use 1 to 1 NAT or is there some other way to do it.  
Thanks in advance,
Jesse
0
Comment
Question by:jessewendt
3 Comments
 
LVL 7

Accepted Solution

by:
jasonpaine earned 500 total points
ID: 17953401
With two static public IP addesses configure the inbound nat and firewall access rule to allow port 80 to your internal servers.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
ESXI home lab network setup (KISS) 12 186
inserting an ACL line Cisco IOS XR Software, Version 5.3.3 2 51
Where is running-config located at in ASR9K? 3 18
Home internet speed 20 33
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question