Solved

deny telnet to cisco switch on my network

Posted on 2006-11-10
2
511 Views
Last Modified: 2013-11-29
hi
i have two switch 3950 connect to distrbution switch then connect to cisco router 2800 then to pix firewall 525
mangement ip of the first switch is 172.16.40.4 and for second switch is 172.16.40.5
network of first switch is 172.16.14.0
network for second switch is 172.16.13.0
i use nat in pix firewall
how i can deny all user from telnet to these switch
i want only IP 172.16.14.30 to enable to telnet to all switch


thanks
0
Comment
Question by:nasemabdullaa
2 Comments
 
LVL 10

Accepted Solution

by:
srgilani earned 500 total points
ID: 17912774
put an accesslist on your router like below

access-list 101 permit tcp host 172.16.14.30 any eq 23
access-list 101 deny tcp any any eq 23
access-list 101 permit ip any any

0
 

Author Comment

by:nasemabdullaa
ID: 17912949
hi
thanks for your reply

thanks
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Pfsense - and other email Servers 8 39
Nimble Storage 3 69
Internet Connection -- PING testing ? 1 29
Network Vs Redistribute Connected Commands 3 11
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question