Solved

3 monitors connected wireless to 1 computer with option of displaying diiferent views.

Posted on 2006-11-14
6
191 Views
Last Modified: 2010-04-17
Is it possible to connect wireless - 3 monitors (about 200 meters apart) to one (1) computer and to send 3 different  bulletins to each monitor at the same moment?
It may be possible to connect to a graphics card up to 4 monitors but not wireless.
Also what program available - included with display card?


Thanks
0
Comment
Question by:gmalt
  • 4
6 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 250 total points
ID: 17939385
Not wirelessly. At 200meters, you might need fiber extenders.
Wireless VGA is only good for relatively  low resolution and short distance 100-300 feet
http://www.engadget.com/2006/01/19/the-wireless-vga-extender-eliminates-some-other-wires-too/
http://www.comprehensiveinc.com/product.asp?product_id=LV3500W&cookie%5Ftest=1

CAT5 extenders are good for up to 600 feet
http://www.networktechinc.com/cat5-vga.html

DVI over fiber
http://www.multidyne.com/RGB2000.html#dvi3000

VGA over fiber
http://www.multidyne.com/RGB2000.html#rgb5000

0
 
LVL 79

Expert Comment

by:lrmoore
ID: 17939406
I use HRT's to tranmit VGA over fiber over 17 miles between PC and display..
http://www.hallresearch.com/products/vga_over_fiber/vga_over_fiber.htm
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 17939412
Longer range wireless VGA extender 3000 feet indoor (good line of sight, no obstructions)
http://www.saveateagle.com/lv4500w-v90.html?ovchn=OTHER&ovcpn=Froogle&ovcrn=LV4500W-V90&ovtac=CMP
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 17939451
DigitalTigers has some solutions
http://www.digitaltigers.com/multiple-monitors.shtml

Using ZenView, a video card that supports mutiple monitors and any combination of VGA extenders you can easily come up with a solution.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Problem Description:   Couple of months ago we upgraded the ADSL line at our branch office from Home to Business line. The purpose of transforming the service to have static public IP’s. We were in need for public IP’s to publish our web resour…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

831 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question