?
Solved

Easy vpn problem

Posted on 2006-11-19
2
Medium Priority
?
294 Views
Last Modified: 2010-04-12
Hi all,
I am facing a problem in Easy vpn. I have an internation  branch, where they are using dynamic public ip. So i confiured easy vpn and installed Cisco vpn in the client side. But in client side, their private ip's are natted in the router. so is that i have to configure nat- traversal in my vpn server ( asa 5510)? . is there any thing i want to do in the client cisco vpn software. Actually the connection is getting terminated after some time only for internation link. all the branches inside the country is working fine.
0
Comment
Question by:abey_varghese
1 Comment
 
LVL 63

Accepted Solution

by:
SysExpert earned 1000 total points
ID: 17975551
SO the issue is ONLY with international links ?

All USA links are working.

Are all USA clents using NAT, or just the International ones ?

That could be your isse, and you may need to configure accordingly.

I hope this helps !
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

One of the Top 10  common Cisco VPN problems are not-matching shared keys. This is an easy one to fix, but not always easy to notice, see the case below. A simple IPsec tunnel between fast Ethernet interfaces of routers SW1 (f1/1) and R1(f0/0). …
Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
Suggested Courses
Course of the Month7 days, 23 hours left to enroll

616 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question