Solved

Problem with Drives and Printer

Posted on 2006-11-21
4
336 Views
Last Modified: 2008-03-06
Greetings all,
Hope I can explain this correctly
I Have the following Drives
C:
D: - removable inside my HPpsc 2210 (printer via USB port)
E: - DVD drive
F: CD-RW
G: DVD-RW - external via USB port

EVERYTIME I insert a disk into a drive, I get the following pop up message:
Please wait while windows configures your HP psc 2210

Then it shows a short progess bar - disappears and eveything runs normally.

How can I correct this and why is it happening??

Thank you
Sky
0
Comment
Question by:skytrader
  • 2
  • 2
4 Comments
 
LVL 70

Accepted Solution

by:
garycase earned 500 total points
Comment Utility
"... EVERYTIME I insert a disk into a drive ..." ==> ANY disk into ANY drive?   ... or just a flash memory device in the printer slot?

In any event, you should do the following:

(a)  Uninstall the HP printer software; then disconnect (unplug the USB cable) the printer.

(b)  Reboot.

(c)  Go to Disk Management and Change the drive letters for your other devices to D:, E:, and F:

(d)  Download the most current software for the PSC-2210 from HP's site.

(e)  Install the HP software -- do NOT connect the printer until told to do so by the software installation routine.
0
 
LVL 70

Expert Comment

by:garycase
Comment Utility
0
 

Author Comment

by:skytrader
Comment Utility
Many Thanks, I will try this tonite and report back. And yes it's ANY drive, not just the flash drive.

Thanks for the quick response

Sky
0
 

Author Comment

by:skytrader
Comment Utility
Gary,

MANY THANKS - problem solved! You are a genius!

Sky
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

Suggested Solutions

Article by: SHIELD1
The 5 R's 1. Repair 2. Restore 3. Reinstall 4. Remote admin 5. Run away OK so I'm not the most skilled engineer around but I definitely have an abundance of experience: electronic repairs since I was 13 and PC and computer hardware repair…
How can this article save you time AND money?  In just a few minutes you may discover something you didn't know existed that is easy enough for you to fix yourself!
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
You have products, that come in variants and want to set different prices for them? Watch this micro tutorial that describes how to configure prices for Magento super attributes. Assigning simple products to configurable: We assigned simple products…

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

6 Experts available now in Live!

Get 1:1 Help Now