Solved

Join redhat ES 4 box to a windows domain

Posted on 2006-11-22
3
395 Views
Last Modified: 2008-02-01
Hello,
I am a Windows administrator who desperatly needs help joining a linux machine to my windows domain.
I know I need to configure samba and use the net join command, but honestly, I do not know if I have samba configured properly.  I'm realy looking for step by step help.

My windows domain is 2003 native, and my linux distro is redhat ES4.  The linux machine is configured and can ping the windows servers and domain name.

I am trying to join the linux machin with the following command:

# net join MEMBER -U Administrator -w SF-MNHC.mnhc.org

I then enter the domain administrator's password, which gives this:

[2006/11/22 16:37:27, 0] libads/kerberos.c:ads_kinit_password(146)
kerberos_kinit_password Administrator@SF-MNHC.MNHC.ORG failed: Cannot find KDC for requested realm
[2006/11/22 16:37:27, 0] utils/net_ads.c:ads_startup(186)
ads_connect: Cannot find KDC for requested realm
Unable to find a suitable server
Unable to find a suitable server


Any help is appreciated
0
Comment
Question by:starmonkey
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 4

Author Comment

by:starmonkey
ID: 18000331
this may also be relevant:
netbios is disabled on my windows domain.  I rely on DNS for resolution
0
 
LVL 12

Accepted Solution

by:
ibu1 earned 500 total points
ID: 18000992
0
 
LVL 4

Author Comment

by:starmonkey
ID: 18026085
That is what I needed.  Thanks!
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

632 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question