Solved

Event ID 12800 on Exchange 2000 Ent.

Posted on 2006-11-27
9
527 Views
Last Modified: 2010-07-27
We are getting frequent application event log error entries....ID 12800 Source: MSExchangeIS.  they are occuring every couple minutes.  and while exchange for the most part is working fine (although we do have a number of complaints about it losing connectivity and searching for the server) i am wondering what is truly causing this.  i have searched the web but found nothing that seems to apply.  i am running exchng 2k on a win 2k3 server with 3gig RAM.  any thoughts would be appreciated.

Mike
0
Comment
Question by:mlwiceman
  • 4
  • 4
9 Comments
 
LVL 104

Expert Comment

by:Sembee
ID: 18020780
Can you post the full event log entry, rather than just a code and the source.

Can you just confirm something else... you are running Exchange 2000 on Windows 2003 server? If so, that isn't supported.

Simon.
0
 

Author Comment

by:mlwiceman
ID: 18020819
"Message processing failed because there is not enough available memory (8007000E-80000000).

For more information, click http://www.microsoft.com/contentredirect.asp. "

this is about it for the message...i did misspeak about the OS...it is exchange 2000 ent. but the OS is windows 2000 server std.
0
 
LVL 104

Expert Comment

by:Sembee
ID: 18020856
I was expecting something like this, but never mind.

Event Type:      Error
Event Source:      MSExchangeIS
Event Category:      General
Event ID:      9671
Date:            27/01/2005
Time:            05:06:55
User:            N/A
Computer:      SERVER2
Description:
User SYSTEM has exceeded the allowed maximum number of simultaneous registrations for MAPI notifications.

 The configured maximum number of event notification registrations is 8.

For more information, click http://www.microsoft.com/contentredirect.asp.
Data:


Have you run the Microsoft Best Practises tool on this machine to see if it flags anything?
Is the server fully up to date on patches?

There are a ton of reasons for this, I would start with this eventid.net page to start with.
http://www.eventid.net/display.asp?eventid=12800&eventno=1105&source=MSExchangeIS&phase=1

Simon.
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 

Author Comment

by:mlwiceman
ID: 18020911
i have looked thru event id and the ones that sounded possible, such as M267255 which refers to the 3 registry key entries, i have tried but to no avail.  the server is patched upto date as of the middle of november when the last patch release came out.

i'm not familiar with the "best practices tool" so i haven't run this on the exchange server.
0
 

Author Comment

by:mlwiceman
ID: 18020922
sorry about the complete msg...here it is:

Event Type:      Error
Event Source:      MSExchangeIS
Event Category:      Content Engine
Event ID:      12800
Date:            11/27/2006
Time:            9:32:34 AM
User:            N/A
Computer:      EXAWB02
Description:
Message processing failed because there is not enough available memory (8007000E-80000000).

For more information, click http://www.microsoft.com/contentredirect.asp.
0
 
LVL 104

Accepted Solution

by:
Sembee earned 250 total points
ID: 18020971
0
 

Author Comment

by:mlwiceman
ID: 18021404
thanks....i will have to look into some security issues apparently...i installed and tried running but it won't write to the log file, give me an error stating as much....but the default security settings for the folder/file is everyone full permissions.  i'll play with it some more and see what it comes up with.  thanks for the advice.

Mike
0
 
LVL 104

Expert Comment

by:Sembee
ID: 18021441
I am not saying that the Exchange tool will flag anything, it may not.
It could be something as simple as bad RAM, particularly if the machine is getting on a bit.

Simon.
0

Featured Post

Does Powershell have you tied up in knots?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This process describes the steps required to Import and Export data from and to .pst files using Exchange 2010. We can use these steps to export data from a user to a .pst file, import data back to the same or a different user, or even import data t…
Read this checklist to learn more about the 15 things you should never include in an email signature.
The basic steps you have just learned will be implemented in this video. The basic steps are shown to configure an Exchange DAG in a live working Exchange Server Environment and manage the same (Exchange Server 2010 Software is used in a Windows Ser…
This video shows how to quickly and easily add an email signature for all users on Exchange 2016. The resulting signature is applied on a server level by Exchange Online. The email signature template has been downloaded from: www.mail-signatures…

861 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question