Solved

Netgear Routing Issue

Posted on 2006-11-27
8
241 Views
Last Modified: 2010-04-09
I have netgear fvs114 firewall router I just obtained 5 static IP addresses and I have two of them pointing to the server and the mx records DNS are pointing to the correct addresses.  I can view the sites via the server when I type the domains in the browser but no one else can get to the sites.  I know it has to be the router so can anyone help?

0
Comment
Question by:grah30
  • 3
  • 3
8 Comments
 
LVL 77

Expert Comment

by:Rob Williams
ID: 18024831
To the best of my knowledge your FVS114 only supports a single static public IP. You configure this on the "Internet IP address" section of the "basic setup" page, and it only provides the option for a single WAN/public IP.
You could as another option, use the same static IP for all traffic, and use port forwarding to forward web traffic (port 80) to the web server, SMTP traffic (port 25) to the mail server, etc. Following site will outline port forwarding for your router with different services:
http://www.portforward.com/english/routers/port_forwarding/Netgear/FVS114/FVS114index.htm
0
 

Author Comment

by:grah30
ID: 18027140
The funny thing is that I can see both sites fine from the servers browser.  I need to set up a passthrough but I am stumbed.
0
 

Author Comment

by:grah30
ID: 18029362
Got it its not the netgear its the modem thanks
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 
LVL 77

Expert Comment

by:Rob Williams
ID: 18030108
Glad to hear you were able to resolve grah30.
Cheers,
--Rob
0
 

Author Comment

by:grah30
ID: 18030166
Well I went back to one static IP because I didn't like the security on the netopia router.  Most people think a nat is a firewall but thats only somewhat true.  I have decided to set it up with host headers and wild card certs.  Thanks guys
0
 
LVL 77

Accepted Solution

by:
Rob Williams earned 500 total points
ID: 18031632
Not sure I follow:
"Got it its not the netgear its the modem thanks"
"I didn't like the security on the netopia router"
I take it you had Server=> Netgear => Netopia ?
As mentioned I am doubtful those devices will support multiple public static IP's.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you are like regular user of computer nowadays, a good bet that your home computer is on right now, all exposed to world of Internet to be exploited by somebody you do not know and you never will. Internet security issues has been getting worse d…
To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …
A short tutorial showing how to set up an email signature in Outlook on the Web (previously known as OWA). For free email signatures designs, visit https://www.mail-signatures.com/articles/signature-templates/?sts=6651 If you want to manage em…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question