Solved

Belkin Wireless Range Extender/ Access Point can not access 192.168.2.1

Posted on 2006-11-28
3
4,532 Views
Last Modified: 2008-01-09
I had to reset the device because the old password was lost and this time can access  192.168.2.1 otherwise working fine.

Thanks


Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\user5>ipconfig

Windows IP Configuration


Ethernet adapter Wireless Network Connection 2:

        Connection-specific DNS Suffix  . : hartwell.
        IP Address. . . . . . . . . . . . : 192.168.0.30
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.0.1

C:\Documents and Settings\user5>
0
Comment
Question by:charliepapa74
3 Comments
 
LVL 14

Accepted Solution

by:
FriarTuk earned 125 total points
ID: 18052486
is your problem that the ap can't access 2.1?
from your ipconfig, you list your gateway as 192.168.0.1.  which means when you reset your router it went from 2.1 back to the factory default of 0.1, so you need to change your ap to point to 0.1 & assign it a static ip of 0.2 or whatever.
0

Featured Post

Live: Real-Time Solutions, Start Here

Receive instant 1:1 support from technology experts, using our real-time conversation and whiteboard interface. Your first 5 minutes are always free.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
Shadow IT is coming out of the shadows as more businesses are choosing cloud-based applications. It is now a multi-cloud world for most organizations. Simultaneously, most businesses have yet to consolidate with one cloud provider or define an offic…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

816 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now