Solved

How to connect a SHDSL service and an ADSL service into one switch

Posted on 2006-11-30
2
272 Views
Last Modified: 2010-04-10
Hello experts,

We have an adsl line for our internet, email etc, gateway ip 192.168.10.1.
We have ordered a SHDSL service and i need to add this service to the same switch. Can i give the shdsl router 192.168.10.2 and put the pc's to use this as the gateway?

 i can keep the adsl line for the mail server only and get the staff to use the shdsl service for internet only. Can this be done or do i need to do some changes in the routing table. The easiest solution please.

Thanks again
Cheers
0
Comment
Question by:jiveman74
2 Comments
 
LVL 4

Accepted Solution

by:
Trilotech earned 500 total points
ID: 18054345
Yes you can.

Make the clients us 192.168.10.2 as their gateway and leave 192.168.10.1 as the gateway on the mail server.

Any direct communication from the clients to the mail server is not being raouted as they are on the same subnet. Just make sure everything is on the same physical network.
0
 

Author Comment

by:jiveman74
ID: 18098112
Thanks mate - this worked
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How VPC help preventing STP Loops 4 130
How to configure this in fortinet firewall 2 63
Cisco switch suggestion 5 65
VPN Server config in Modem 5 25
Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question