I have a VPN client that access the 1800 router setup with IPSec VPN. When the VPN client connects and authenticates a window pops up saying that Windows will logoff in 5 seconds, then after re-logging in the VPN is established. I'm sure this is a security thing but how do I disable it so I can VPN connect w/o logging off?
Have a look at C:\Program Files\Cisco Systems\VPN Client\vpnclient.ini.
Search for the [Netlogin] section. Change the values according to what you will find here:
If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.
Having the need
* to contact many different companies with different infrastructures
* do remote maintenance in their network
required us to implement a more flexible routing solution. As RAS, PPTP, L2TP and VPN Client connections are no…
Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries.
To do so, you wo…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…