Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Static Route

Posted on 2006-12-01
2
283 Views
Last Modified: 2010-04-17
I need to make a new static route in my cisco router.  The person that use to do it is now gone, and I need to add this route before someone takes his place.  

The table looks like this:

     10.0.0.0/24 is subnetted, 2 subnets
S       10.4.6.0 [1/0] via 192.168.12.1
S       10.1.3.0 [1/0] via 192.168.12.1

I need to add a third one, with the number of 10.1.60.0 (I think)
What is the syntax I need to use?
0
Comment
Question by:bran0923
2 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 18054450
ip route <network> <mask> <next hop ip address>

i.e.

config t
ip route 10.1.60.0 255.255.255.0 192.168.12.1
end
0
 
LVL 1

Author Comment

by:bran0923
ID: 18054510
Don, my man!  Thanks!!
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
WatchGuard T50 - Internet Priority Based on VLAN or User 1 44
Router assigned IP addresses 18 98
Linksys e2500 wireless router - should I upgrade 6 44
Deny permission ACL 16 26
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question