FalconTwo
asked on
Pc AnyWhere connectivity
Hello All
I have a user who wants to connect to the office from home or any where via PCAnywhere. We have a pix FW. How do I configure to open the PcAnywhere ports.
I have seen several configs on the internet.
Of course I have an external address e.g. 199.199.199.9 going to her PC 10.10.10.1
What I have so far is:
access-list outside_access_in permit tcp any eg 5632 host 172.18.0.70 eg 5632
access-list outside_access_in permit tcp any eg 5632 host 172.18.0.70 eg 5632
access-group outside_access_in in interface outside
How will the FW know to NAT to her PC
The Falcon
I have a user who wants to connect to the office from home or any where via PCAnywhere. We have a pix FW. How do I configure to open the PcAnywhere ports.
I have seen several configs on the internet.
Of course I have an external address e.g. 199.199.199.9 going to her PC 10.10.10.1
What I have so far is:
access-list outside_access_in permit tcp any eg 5632 host 172.18.0.70 eg 5632
access-list outside_access_in permit tcp any eg 5632 host 172.18.0.70 eg 5632
access-group outside_access_in in interface outside
How will the FW know to NAT to her PC
The Falcon
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.