Why Experts Exchange?

Experts Exchange always has the answer, or at the least points me in the correct direction! It is like having another employee that is extremely experienced.

Jim Murphy
Programmer at Smart IT Solutions

When asked, what has been your best career decision?

Deciding to stick with EE.

Mohamed Asif
Technical Department Head

Being involved with EE helped me to grow personally and professionally.

Carl Webster
CTP, Sr Infrastructure Consultant
Ask ANY Question

Connect with Certified Experts to gain insight and support on specific technology challenges including:

Troubleshooting
Research
Professional Opinions
Ask a Question
Did You Know?

We've partnered with two important charities to provide clean water and computer science education to those who need it most. READ MORE

troubleshooting Question

Printer Recommendations for letter sized label sheets (avery 51xx)

Avatar of hakalugi
hakalugi asked on
Printers and Scanners
3 Comments1 Solution649 ViewsLast Modified:
Printer Recommendations for letter sized label sheets (avery 51xx)

they've had hp 1320's, and have feed troubles, tried a 2605 when "single pass" was wanted (they didn't need the color) and it wouldn't even pickup, just called it a 'jam' at the bottom of the feed path; then tried 2015 per HP support, that sucked the same.  then that HP rep said to try business inkjet 2300 (i've used the 1200's so i see the logic) - this is for barcode lables so we had only been looking at lasers, but we gave it a shot.

now, b/c of the offset 3 drive/pickup wheels, and the back of the label sheets being "waxy/slick" (avery style) the feed is 'low' and the printing skewed (we even printed config pages from the printer's firmware and when on 'labels' they exhibited the same symptoms as anything through software)

so, the apps and our label templates "align" fine on lasers, but we have jams/feed issues.  On the business inkjet, we have no feed/jamming but crap for alignment.

this is for small retail store, so they can't use a personal label (one at at time'er) as they print 150 labels at a time (5 sheets of 30), but can't seem to find a printer that fits the mold.

what say you?
ASKER CERTIFIED SOLUTION
Avatar of printerguy
printerguy

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Commented:
This problem has been solved!
Unlock 1 Answer and 3 Comments.
See Answers