troubleshooting Question

Save config on old Cisco Cat 6006

Avatar of reb_elmagnifico
reb_elmagnifico asked on
Networking Hardware-OtherSwitches / Hubs
3 Comments1 Solution594 ViewsLast Modified:
This is going to be an easy one for you, but I can't seem to save the config of a Catalyst 6006 for the life of me.

I thought I could simply type "write mem", but memory is not an option for the "write" command.  Then after doing some research it seems that I have to enter "text" mode first, so then I tried "set config mode text" and then "write memory", but still doesn't work.

Here is what happens when attempted:
Console> (enable) set config mode text
Usage: set config acl <nvram>
Console> (enable) wr mem
Usage: write network [all]
       write terminal [all]
       write <host> <file> [all] [rcp]

Please help, I am not used to these old switches :)

Thanks a ton!

Join the community to see this answer!
Join our exclusive community to see this answer & millions of others.
Unlock 1 Answer and 3 Comments.
Join the Community
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 3 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros