Solved

Accepting Traffic for Multiple Public IP's on ASA 5510 Outside Interface

Posted on 2007-03-20
2
320 Views
Last Modified: 2013-11-16
Sorry if this is a bit of a lame question, but I'm a bit of a beginner with Cisco ASA devices.
What I am trying to do is configure the ASA 5510 to accept traffic for a range of public IP's on its outside interface. It currently has an external IP configured and working fine, but we need to accept traffic for another range of IP's as well.

Can someone point me in the right direction?

Thanks in advance.
0
Comment
Question by:EIHI-IT
  • 2
2 Comments
 
LVL 32

Accepted Solution

by:
rsivanandan earned 50 total points
ID: 18761198
That would be pretty simple,

lets say you have been assigned with an ip range of x.x.x.x-x.x.x.y and want to use it to host a web server inside, this is what you want;

static(inside,outside) x.x.x.x <InternalWebServerIP> netmask 255.255.255.255

access-list outside_in permit tcp any host x.x.x.x eq www

access-group outside_in in interface outside

Hope that clears up, if you have a specific requirement mention that and we'll figure out the cli.

Cheers,
Rajesh
0
 
LVL 32

Expert Comment

by:rsivanandan
ID: 18770226
Hello? Any note?

Cheers,
Rajesh
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
info required for port scans 1 52
Opening Port 80 10 66
Sonicwall Email los and Alerts 1 63
VPN running on Windows 2008 Server 11 86
Wikipedia defines 'Script Kiddies' in this informal way: "In hacker culture, a script kiddie, occasionally script bunny, skiddie, script kitty, script-running juvenile (SRJ), or similar, is a derogatory term used to describe those who use scripts or…
To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question