Solved

Concentrator:  Monitoring Packets on an Interface

Posted on 2007-03-21
2
232 Views
Last Modified: 2010-04-12
Hello Experts,

I have a VPN Concentrator 3005 and of course new to this device.  I was wondering if their is a way to capture packets like in a PIX or ASA devices to determine that the packet is definitely reaching the interface.  If so, can you provide a link for the instruction.

As always, thank you for your time on this matter.
0
Comment
Question by:coperator
  • 2
2 Comments
 
LVL 19

Expert Comment

by:nodisco
ID: 18769280
hi coperator
0
 
LVL 19

Accepted Solution

by:
nodisco earned 500 total points
ID: 18769282
Sorry - hit enter a bit early :-)

Yes you can do this - go into the the web admin screen and go to :
Monitoring
Filterable event log
live event log
Make a few attempts from your client and then click on "Pause display" as you may have a lot of output depending on your site.

Find your source ip in the output and you're on your way to troubleshoot it.

hope this helps
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Join & Write a Comment

Suggested Solutions

Overview Often, we set up VPN appliances where the connected clients are on a separate subnet and the company will have alternate internet connections and do not use this particular device as the gateway for certain servers or clients. In this case…
For a while, I have wanted to connect my HTC Incredible to my corporate network to take advantage of the phone's powerful capabilities. I searched online and came up with varied answers from "it won't work" to super complicated statements that I did…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

9 Experts available now in Live!

Get 1:1 Help Now