Solved

Send as Admin in ex. 5.5

Posted on 2007-03-23
12
199 Views
Last Modified: 2013-12-05
Hello,

How do I configure my Ex. 5.5 running server 2k to allow me to send as administrator?  I have tried a few areas but no luck- please assist.

Thanks
0
Comment
Question by:lazik
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 6
  • 6
12 Comments
 
LVL 35

Expert Comment

by:rakeshmiglani
ID: 18778179
what do you want to send as Administrator?
0
 

Author Comment

by:lazik
ID: 18778240
I would like to notify users of power outages and general info regarding the site and new/updated changes but, I would like this info sent As Administrator w/out my info and signature block.  I have a Admin mailbox setup already however, I have not been able to send as Admin successfully yet.
0
 
LVL 35

Accepted Solution

by:
rakeshmiglani earned 500 total points
ID: 18778421
if you have assigned the permissions correctly then the Send As should work.
you need to assign the Send As permissions from the permissions tab of this admin mailbox. Don't give the Send On Behalf from the delivery tab.
0
Ransomware-A Revenue Bonanza for Service Providers

Ransomware – malware that gets on your customers’ computers, encrypts their data, and extorts a hefty ransom for the decryption keys – is a surging new threat.  The purpose of this eBook is to educate the reader about ransomware attacks.

 

Author Comment

by:lazik
ID: 18778443
When I add my name to the Windows NT Accounts with permission and select the Send As from the Roles drop down menu- I am still unable to send as Admin, I receive the Originator does not have permissions to submit message error.
0
 
LVL 35

Assisted Solution

by:rakeshmiglani
rakeshmiglani earned 500 total points
ID: 18778811
try giving the Send As permissions to another account and see if that works. also if possible, post the NDR here.
0
 

Author Comment

by:lazik
ID: 18779005
The Admin mailbox is hidden from the GAL and the Primary windows NT account is the Administrator.  In the permissions tab of the Admin account, my account has the send as, mailbox owner and modify user attributes rights checked, same as the Admin account.

Thanks for the assistance thus far.

Here is the NDR- The originator does not have permission to submit message
0
 
LVL 35

Assisted Solution

by:rakeshmiglani
rakeshmiglani earned 500 total points
ID: 18779100
have you configured the Admin mailbox as an additional mailbox in your outlook or have you configured outlook the open the Admin mailbox and you are trying to open it using your account?
0
 

Author Comment

by:lazik
ID: 18779145
The Admin mailbox is not attached to my Outlook mail, as a matter of fact, I can not attach it at this time.  I receive the Name could not be resolved when I try this.
0
 
LVL 35

Assisted Solution

by:rakeshmiglani
rakeshmiglani earned 500 total points
ID: 18779212
The name could not be resolved because the Admin mailbox is hidden from the GAL.
do how are you Sending As the Admin mailbox?
0
 

Author Comment

by:lazik
ID: 18779252
Good question- I'm trying to obtain the send as permissions so I can send as, what is the way to un-hide it?  I think wer'e getting close now.
0
 
LVL 35

Assisted Solution

by:rakeshmiglani
rakeshmiglani earned 500 total points
ID: 18779265
the option in under the advanced tab
0
 

Author Comment

by:lazik
ID: 18779295
That is what I needed,  glad you were patient and persistant with me, I really appreciate all that you and the other Experts do on this site.

Thanks again and see you next time.
0

Featured Post

Has Powershell sent you back into the Stone Age?

If managing Active Directory using Windows Powershell® is making you feel like you stepped back in time, you are not alone.  For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
This article will help to fix the below error for MS Exchange server 2010 I. Out Of office not working II. Certificate error "name on the security certificate is invalid or does not match the name of the site" III. Make Internal URLs and External…
In this video we show how to create a Resource Mailbox in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: Navigate to the Recipients >> Resources tab.: "Recipients" is our default selection …
how to add IIS SMTP to handle application/Scanner relays into office 365.
Suggested Courses

617 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question