Solved

ASUS P4S800-mx MB with Intell CPU that will not boot

Posted on 2007-03-24
4
1,212 Views
Last Modified: 2012-08-13
I have a ASUS P4S800-mx MB with Intell CPU that will not boot.  Fans, lights, all power up. Computer was on and I went away and then came back got a no sync on Monitor.  Tried different monitor, Tried new power supply, changed MB Battery, reset CMOS.   The lights on the CD DVD's stays green and there is no Hard Drive Access.  I removed all device except KeyBoard, Mouse, Monitor.  Still no boot.

Do I have a bad motherboard.
0
Comment
Question by:Biggeek77
  • 2
  • 2
4 Comments
 
LVL 4

Accepted Solution

by:
groetting earned 500 total points
ID: 18786140
When you switch it on, do you get a beep that didnt come before? Are you using the integraded graphics or do you have a gfx card? If you are using a gfx board, try removing it and connecting the monitor to the integrated graphics. If you are using the internal one, try connecting a gfx board.
0
 

Author Comment

by:Biggeek77
ID: 18788409
There is no beep when I turn the computer on.  We are using an integrated graphics, I will try using a gfx card. thx
0
 

Author Comment

by:Biggeek77
ID: 18790022
Changing gfx card did not help.
0
 
LVL 4

Expert Comment

by:groetting
ID: 18790953
Once when I destroyed my CPU I got the same symptoms as you. Do you have access to another cpu you can test with? By the looks of it I`d say that its most likely either the cpu or the motherboard
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

In this article, I will show you HOW TO: Suppress Configuration Issues and Warnings Alert displayed in Summary status for ESXi 6.5 after enabling SSH or ESXi Shell.
In  today’s increasingly digital world, managed service providers (MSPs) fight for their customers’ attention, looking for ways to make them stay and purchase more services. One way to encourage that behavior is to develop a dependable brand of prod…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

9 Experts available now in Live!

Get 1:1 Help Now