Solved

Outgoing Internal IP to External IP Mapping

Posted on 2007-03-25
2
248 Views
Last Modified: 2010-04-17
How can I map or NAT an internal IP to an external ip on my Cisco 1720 router? I have a server that when it NATs out of our network, it needs to show a different IP than other PCs going out. It shit possible?

Thanks,
Tareef
0
Comment
Question by:TareefA
2 Comments
 
LVL 28

Accepted Solution

by:
batry_boy earned 125 total points
ID: 18790652
Yes it is possible.  Here's how...

ip nat inside source static <internal_server_IP_address> <public_server_IP_address>

This will NAT the internal IP address of the server into the public IP address you specify...
0
 

Author Comment

by:TareefA
ID: 18791960
Hello Batry_Boy,

Ok, I was using ip nat outside.

Thanks,
Tareef
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Join & Write a Comment

Suggested Solutions

I recently updated from an old PIX platform to the new ASA platform.  While upgrading, I was tremendously confused about how the VPN and AnyConnect licensing works.  It turns out that the ASA has 3 different VPN licensing schemes. "site-to-site" …
This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now