Solved

point to point T1 connection

Posted on 2007-03-26
1
214 Views
Last Modified: 2010-04-17
I have a point to point T1 connection from A to B and A to C. No clocking is provided by the provider. On the routers, I set the A's router clock to line and B's router clock to internal. And I did the same for the A to C too.  So my question is , when no clocking is provided, you set one side to line and the other side to internal???
0
Comment
Question by:adil_acikgoz
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 32

Accepted Solution

by:
rsivanandan earned 125 total points
ID: 18793709
YES, Typically for point to point links, ISP do not provide the clocking and you'll have to have one of the end provide it and follow that clocking on the other end.

Cheers,
Rajesh
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Viber-Only Restriction 6 72
Expanding Subnet Mask 20 207
inserting an ACL line Cisco IOS XR Software, Version 5.3.3 2 59
Automated backups of ASA's and Nexus (5k and 7K) 24 131
New Server 172.16.200.2  was moved from behind Router R2 f0/1 to behind router R1 int f/01 and has now address 172.16.100.2. But we want users still to be able to connected to it by old IP. How to do it ? We can used destination NAT (DNAT).  In DNAT…
Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question