Solved

WSUS SP1 CLient not checking in with server

Posted on 2007-03-26
2
300 Views
Last Modified: 2010-03-17
Have WSUS SP1 Running. My client are not checking in. The are all connected on the same LAN as the WSUS Server no connection issues. I have The GPO to Chect for updates every hour but they have gone4 day without checking in??? Any thoughts?
0
Comment
Question by:RobertsExchange2003
2 Comments
 
LVL 6

Accepted Solution

by:
trippleO7 earned 500 total points
Comment Utility
There's a few different things to check initailly.  Is it all your clients, or just a few?

1)  In GPO are you pointing to the WSUS server?  e.g. http://servername, https://servername, or http://servername:8530 depending on how you set up your WSUS server.

2)  Make sure your GPO is configured for "Computer Configuration" and that those affected workstations are in that OU where the GPO is being applied.

3)  Were those clients imaged machines using ghost, altiris, acronis, etc?  If ss and you didn't sysprep them, you may need to create a new SID.  See NewSID:  http://www.microsoft.com/technet/sysinternals/Security/NewSid.mspx

Usually if none of your clients are checking in, it's #1 above.  Make sure if you used a different port, you specify that in your GPO.

0007

0
 

Author Comment

by:RobertsExchange2003
Comment Utility
No the PC are not ghosted - I have the GPO setup for option 4  - check for updates every hour - applied to the correct OU (for 5 days) THe GPO is pointing to the WSUS server (installed WSUS on port 80). THey will connect at forst and then just stop checking in??? Couls it be windows firewall?
0

Featured Post

Control application downtime with dependency maps

Visualize the interdependencies between application components better with Applications Manager's automated application discovery and dependency mapping feature. Resolve performance issues faster by quickly isolating problematic components.

Join & Write a Comment

Companies that have implemented Microsoft’s Active Directory need to ensure that the Active Directory is configured and operating properly. If there are issues found and not resolved, it eventually leads the components to fail or stop working and fi…
Introduction You may have a need to setup a group of users to allow local administrative access on workstations.  In a domain environment this can easily be achieved with Restricted Groups and Group Policies. This article will demonstrate how to…
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…
This tutorial will walk an individual through the process of transferring the five major, necessary Active Directory Roles, commonly referred to as the FSMO roles from a Windows Server 2008 domain controller to a Windows Server 2012 domain controlle…

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now