• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 497
  • Last Modified:

traffic shaping

I wish to shape traffic on inbound and outbound traffic . Can I do this with the command on a vlan

interface vlan826
            traffic-shape rate <target bit rate> <bit per interval> < >

Does this command only apply for frame-relay ?

what i wish to do is to make sure that inbound and outbound traffic on gig 6/5 which is in vlan 826, can`t be higher than 2 mb/s. gig 6/5 is a lan interface
0
TorgN
Asked:
TorgN
  • 2
1 Solution
 
dr_shivanCommented:
I'm not sure what hardware you're using, but the one that i'm using, a bandwidth management hardware will list out all services running and would allow me to give priority and the min and max amount of bandwidth to allocate.
0
 
TorgNAuthor Commented:
I`m using a catalyst 6506
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now