Recomended LVM logical volume

Posted on 2007-03-27
Medium Priority
Last Modified: 2010-03-18
what are the recomended linux partitions can be made LVM logical volume in the RHEL4 , can i make the following LVM logical volume partitions:
/work ( for file sharing)

I think /boot ,swap and / are not supposed to be kept under LVM , please suggest me
Question by:D_wathi
  • 2
LVL 14

Expert Comment

ID: 18799347
yes you are rigth in my servers i have the same conf like you but i suppress work and opt but is my installations... any way try to keep /boot out of lvm
LVL 14

Accepted Solution

pablouruguay earned 2000 total points
ID: 18799349
and RHEL have a disk druid to make automagically this thinks

Author Comment

ID: 18805788
Thanks for the support

Featured Post

The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
How to fix display issue, screen flickering issue when I plug in power cord to the machine. Before I start explaining the solution lets check out once the issue how it looks like after I connect the power cord. most of you also have faced this…

587 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question