Solved

configuration of cisco 1800 router for frame_relay

Posted on 2007-03-27
1
265 Views
Last Modified: 2013-12-14
hello expert,

Can any expert provide step by step configuration of out of box cisco 1841 router
that will be connect to frame_relay enivorement via CSU/DSU.

thanks
0
Comment
Question by:jomfra
1 Comment
 
LVL 10

Accepted Solution

by:
Sorenson earned 500 total points
ID: 18816212
if the CSU is internal it will need to be configured for the proper channel count, and frame type, etc.  Afterwards configure the frame-relay.
!
int s0/0 (your interface may be different)
 no ip addr
 description Frame Relay Connection
 encapsulation frame-relay
 no shut
!
int s0/0.1 point-to-point
 ip address x.x.x.x y.y.y.y
 frame-relay interface-dlci DDD
!

You will need to get the DLCI number from the frame-relay provider.  http://www.cisco.com/warp/public/125/12.html is a good place for troubleshooting tips.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Destination host unreachable 12 128
Cisco Router help 5 71
Understanding split up wire 10 36
DMVPN Spoke Connectivity Issue 1 34
Sometimes you have to pull out old tricks to get a new firewall to work… While we were installing a new Sonicwall at a customers site we found that sites they were able to visit before were not working.  It seemed random and we could not understa…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

791 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question